|
Forum Mediatec - Depozitul de Cartuse Consumabilele sunt pasiunea noastra! Vanzari online: www.mediatec.ro
|
Subiectul anterior :: Subiectul următor |
Autor |
Mesaj |
florin69
Data înscrierii: 18/Feb/2010 Mesaje: 2
|
Trimis: Sâm Feb 20, 2010 12:34 am Titlul subiectului: canon 610 |
|
|
am un canon mp 610 si imi arata eroarea 5010 si nu mai stiu ce sai fac |
|
Sus |
|
|
Tamas
Data înscrierii: 28/Sep/2008 Mesaje: 70 Locație: Galati
|
|
Sus |
|
|
florin69
Data înscrierii: 18/Feb/2010 Mesaje: 2
|
Trimis: Dum Feb 21, 2010 9:57 pm Titlul subiectului: |
|
|
ai avut dreptate era cu scanarul de la o mufa nu facea contact si acum imi arata eroarea 6502 |
|
Sus |
|
|
Tamas
Data înscrierii: 28/Sep/2008 Mesaje: 70 Locație: Galati
|
|
Sus |
|
|
mediatecar Site Admin
Data înscrierii: 16/Noi/2007 Mesaje: 2406
|
Trimis: Mar Feb 23, 2010 11:40 am Titlul subiectului: |
|
|
De la Canon citire:
Citat: | Solutions for error 6502
Issue: ERROR LCD: Error Code 6502
1. Press ON/OFF switch to reset the multifunction device
2. Snap in ink tanks properly MP610
3. The MP610 may require repair |
Adica opreste-l si reporneste-l, verifica sa fie corect bagate cartusele si daca se mentine s-ar putea sa se lase cu o vizita la un service canon...
Nu asa. Deci:
Eroarea ta inseamna in general ca imprimanta nu recunoaste chipul de pe cartus. Cateva idei:
Citat: | Sometimes the Canon printers which use PG-5BK/CL-8 colour cartridges with chips will give error mesaages like 6502 or other types of error meaasge to do with the cartridges, which has the orange light flashing and the printer will not work. Follow this procedure which quite often resets the printer and allows it to resume printing.
When error is indicated, turn power switch off so green light is extinguished.
First hold down resume button and then hold down power button so both are held down at same time
When green light comes on, continue holding down power button and let resume button go, then press resume button twice. Then let power button go.
Then press resume button four times, power button should be releasedbefore doing this.
Wait until printer settles down, if power is off, turn on. If power will not come on, remove power cord from back of printer, then wait 15 seconds before plugging back in again and turn power on. This normally solves the error problem - if not go through same procedure again.
Incidentally, you may find that if the chips had previously been disabled,the low ink warnings are showing againand they will have to be disabled once more. This would indicate that the above procedure clears the firmware memory of the disabling of the chips, this may be usefull if you need some warranty work done on you printer after the chips had been disabled. Canon does warn that disabling the chips may result in the printer's warranty being voided |
Citat: | Hello
Try it for a canon
Error Code 6502 appears generally after chaging a cartridge.
Solution:
1. Unplug the printer.
2. Remove the faulty Cartridge
3. Plug in the printer and press and hold power button
4. Keep it held down. Press Resume twice, and this should reset the fault. |
|
|
Sus |
|
|
|
|
Nu puteți crea un subiect nou în acest forum Nu puteți răspunde în subiectele acestui forum Nu puteți modifica mesajele proprii din acest forum Nu puteți șterge mesajele proprii din acest forum Nu puteți vota în chestionarele din acest forum
|
|