Subiectul anterior :: Subiectul următor |
Autor |
Mesaj |
theknow
Data înscrierii: 20/Dec/2010 Mesaje: 16 Locație: United State
|
Trimis: Lun Dec 20, 2010 2:13 am Titlul subiectului: How to reset Xerox wc 3220? help! |
|
|
hello, to everybody I hope that somebody coul help me to reset my wc 3220 I`ve see a post whit instructions to reset a wc 3210.. and I did not understand so much because I dont speak rumano.. but it doesnt matter becuse I can use the traslator... I will thanks so much If some body can explain to me how to reset those printer.. step bye step. and if does exist some posiblities to damage the printer. |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
mediatecar Site Admin
Data înscrierii: 16/Noi/2007 Mesaje: 2406
|
Trimis: Lun Dec 20, 2010 9:41 am Titlul subiectului: |
|
|
Will look into it, be back with an answer 2day. ![Smile](images/smiles/icon_smile.gif) |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
mediatecar Site Admin
Data înscrierii: 16/Noi/2007 Mesaje: 2406
|
Trimis: Lun Dec 20, 2010 5:29 pm Titlul subiectului: |
|
|
[u]OK, the reset you have to made is in fact a firmware update, here it is:
[/u]
1. You can find the firmware-update here:
https://rapidshare****/files/438385143/work_center_3220.rar
(choose "FREE USER" and wait until the "DOWNLOAD"-button appears)
2. Firmware update procedure:
- open the right-side lid
- remove the CN 20 connector (CRUM)
(or use cardtridge without chip)
- the cartridge must be in place and front lid closed
- make the firmware update (i recommend using an UPS for that, to avoid accidental powerfailure in the middle of update)
- after update (it last aprox 5 minutes, the flash is kind of large), follow the steps:
Press as below:
1.Menu x 1
2.> x 2
3. OK x 1
4. > x 4
5. OK x1
6. > x 1
7. OK x 1
Message : Clear counts / Clearing...
- Open and close again the front lid; this leads to balance the derial memory with the temporal one (the reseted one)
Partial counter level zero. Toner level 100%.
For checking porpouse: from maintenance Menu press "Maintenance -> Supplies life -> Supplies info -> Ok" and it will print a report.
It's a proved method, please come back wit fedback.
And guide fellows to our forum, we are glad to help anyone, english is, of course, not an isue here, we are all profesionals and the language of printers is... English!
Have a Merry Christmas, by the way! And a Happy New Year! |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
theknow
Data înscrierii: 20/Dec/2010 Mesaje: 16 Locație: United State
|
Trimis: Lun Dec 20, 2010 6:13 pm Titlul subiectului: |
|
|
Thanks.....Only some cuestions more..
should I connect the printer by Usb or by red? did I need some drivers?
Does it matter the firmware version of my printer, and if there some posibities of incompatibility,? I have Win 7 should I use another OS?
thanks a lot for your help..I gonna do it and post a feedback,
Merry Christmas and happy new year for you..Thanks again ![Very Happy](images/smiles/icon_biggrin.gif) |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
mediatecar Site Admin
Data înscrierii: 16/Noi/2007 Mesaje: 2406
|
Trimis: Mar Dec 21, 2010 11:54 am Titlul subiectului: |
|
|
theknow a scris: | Thanks.....Only some cuestions more..
should I connect the printer by Usb or by red? did I need some drivers?
Does it matter the firmware version of my printer, and if there some posibities of incompatibility,? I have Win 7 should I use another OS?
thanks a lot for your help..I gonna do it and post a feedback,
Merry Christmas and happy new year for you..Thanks again ![Very Happy](images/smiles/icon_biggrin.gif) |
USB is ok to connect the printer, but i would strongly recommend to proceed the firmware reset trough a win XP OS, because i have not a clue if all this was testet on win7 or not.
It also woul help to make this procedure with someone beside you that have a little experience in that matter. Because it always can happen something to go otherwise then planned, and in that moment a mind used with that kind of problems is very usefull....
![Smile](images/smiles/icon_smile.gif) |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
theknow
Data înscrierii: 20/Dec/2010 Mesaje: 16 Locație: United State
|
Trimis: Mar Dec 21, 2010 8:30 pm Titlul subiectului: |
|
|
Hi.. thanks a lot... for your help.. thanks a lot... you didnt know how much IŽve tried to find a way to do this, and the toners cost is too much
look my printerŽs firmware/motor is Item: 2.50.00.95; estatus: 1.00.11 emulation vesion is item:PCL5e 5.92 02-12-2009 estatus: PCL6 5.93 03-21-2009
is the firmware update compatible whint my printer? because I boutg it this year and sometimes Xerox update the software |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
merlingerin
Data înscrierii: 30/Mar/2010 Mesaje: 111 Locație: Bucuresti
|
Trimis: Mie Dec 22, 2010 1:11 am Titlul subiectului: |
|
|
Hello,
The solution fits your equipment, as you described by info, generated from configuration page.
Also is true that appears a new firmware v.98 for WC 3220.
By the way, if you have this v.98 version, fix with v.95 doesn't work. (and do not damage your formatter - don't worry)
The solution for this unfortunated situation is to send by e-mail the S/N of the equipment , and we will generate an unique fix soft, fit just for your machine, and not for any other!
For this particular situation, please contact mister Ghiocel.
Good luck. _________________ 0747.454.998 |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
theknow
Data înscrierii: 20/Dec/2010 Mesaje: 16 Locație: United State
|
Trimis: Mie Dec 22, 2010 5:31 am Titlul subiectului: |
|
|
thanks again... I`m gonna search the firmware version.. because I dont know were is.. and if I have the 0.95 I gonna make.. this is a great.. forum. thaks so much.. all of you have helped me a lot.. |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
mediatecar Site Admin
Data înscrierii: 16/Noi/2007 Mesaje: 2406
|
Trimis: Mie Dec 22, 2010 10:10 am Titlul subiectului: |
|
|
merlingerin a scris: |
For this particular situation, please contact mister Ghiocel.
|
merlingerin ment you to contact Ghiocel on this forum (he is an old member of it) with a PM, of course, but i think you've figured it out yourself. ![Smile](images/smiles/icon_smile.gif) |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
theknow
Data înscrierii: 20/Dec/2010 Mesaje: 16 Locație: United State
|
Trimis: Joi Dec 23, 2010 2:47 am Titlul subiectului: |
|
|
ok.. but I think that I have the right firmware version, my version is 2.20.00..95 that .95 is your reference realy? well I hope so..
And so I want to post this tool.. is the original Xerox tool for firmware uptade but I replace the original firmware whit your firmware update.. I have not tested it yet, I have afraid to do it , but IŽm posting this aplication here because you have the experience to do it whitout problems.. and its would be a easier way to make the update from Windows..
I hope that you would tell me if these tool is a good idea or not.. Thanks
http://rapidshare****/files/438806336/Firmware_update.._usin_xerox_tool.rar |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
merlingerin
Data înscrierii: 30/Mar/2010 Mesaje: 111 Locație: Bucuresti
|
Trimis: Sâm Dec 25, 2010 8:18 pm Titlul subiectului: |
|
|
Just fix it with v.95 !It will be Ok.
Merry Christmas! _________________ 0747.454.998 |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
theknow
Data înscrierii: 20/Dec/2010 Mesaje: 16 Locație: United State
|
Trimis: Dum Dec 26, 2010 10:02 pm Titlul subiectului: |
|
|
Thanks a lot, to all of you... Whis you a very happy new year.. |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
theknow
Data înscrierii: 20/Dec/2010 Mesaje: 16 Locație: United State
|
Trimis: Lun Ian 03, 2011 3:13 am Titlul subiectului: |
|
|
Hi I have another cuestion, I hope you can help me and excuse me please if i`m so meticulous, is because the printer is not my own.
well the cuestion is, if I have to do another steeps before write the update, I read a post and there they say that I have to push stop-clear and at the same time push power, and wait 2 or 3 secons, well I dont understand so much because it is in turk I think, Help me please,
Thanks again to al of you.. |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
merlingerin
Data înscrierii: 30/Mar/2010 Mesaje: 111 Locație: Bucuresti
|
Trimis: Lun Ian 03, 2011 11:17 pm Titlul subiectului: |
|
|
That is the procedure to force the MFP entering download mode.
As I have said above, just execute the fix ! Aware of power failure for about 4-5 minutes, the duration of erase and write of Spansion Flash chip ( firmware host) !For this you may use a UPS , and open the cartidge door for the time of firmware update !
Good luck(again and final ) !! _________________ 0747.454.998 |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
theknow
Data înscrierii: 20/Dec/2010 Mesaje: 16 Locație: United State
|
Trimis: Mar Ian 04, 2011 1:54 am Titlul subiectului: |
|
|
Thanks. jaja Im sorry if I have made to much cuestions, but its very important to me, do not make any wrong,
look but above in the instructions say that the front lid must be closed, and you say it must be open, or is not the same door?
Thanks, |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
merlingerin
Data înscrierii: 30/Mar/2010 Mesaje: 111 Locație: Bucuresti
|
Trimis: Mar Ian 04, 2011 10:54 am Titlul subiectului: |
|
|
In the front .. is a door, not a lid !
You can flash with or without that door open! But ( if use an UPS) door open, do not permit the oven to charge...and over-charge the UPS ! _________________ 0747.454.998 |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
Florin_Rosu
Data înscrierii: 05/Mar/2009 Mesaje: 26
|
Trimis: Mie Ian 05, 2011 12:31 am Titlul subiectului: workcentre 3119 |
|
|
hello everyone and Happy New Year! I have a little question..The procedure described above can be used also for Xerox Workcentre 3119 model?...It worth's to try? I have to update the firmware every time I make a cartridge refill? Sorry if I said something stupid ![Embarassed](images/smiles/icon_redface.gif) |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
theknow
Data înscrierii: 20/Dec/2010 Mesaje: 16 Locație: United State
|
Trimis: Mie Ian 05, 2011 5:26 am Titlul subiectului: |
|
|
All right, thanks, a lot, to all of you, thak you very much. |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
merlingerin
Data înscrierii: 30/Mar/2010 Mesaje: 111 Locație: Bucuresti
|
Trimis: Mie Ian 05, 2011 12:55 pm Titlul subiectului: Re: workcentre 3119 |
|
|
Florin_Rosu a scris: | hello everyone and Happy New Year! I have a little question..The procedure described above can be used also for Xerox Workcentre 3119 model?...It worth's to try? I have to update the firmware every time I make a cartridge refill? Sorry if I said something stupid ![Embarassed](images/smiles/icon_redface.gif) |
Florin ,
La Xerox WC 3119 se reseteaza chip-ul la fiecare reumplere, sau se inlocuieste.
Exprima-te in romaneste, e forum romanesc !!
![Very Happy](images/smiles/icon_biggrin.gif) _________________ 0747.454.998 |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
Florin_Rosu
Data înscrierii: 05/Mar/2009 Mesaje: 26
|
Trimis: Mie Ian 05, 2011 3:53 pm Titlul subiectului: |
|
|
merlingerin,
Multumesc mult pentru informatie si promptitudinea cu care a fost furnizata. Cat despre limba engleza, am zis sa ma incadrez si eu in tiparele acestui topic si sincer ma bucur cand vad ca acest forum depaseste granitele de nationalitate si limba ![Very Happy](images/smiles/icon_biggrin.gif) |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
mediatecar Site Admin
Data înscrierii: 16/Noi/2007 Mesaje: 2406
|
Trimis: Joi Ian 06, 2011 11:59 am Titlul subiectului: Re: workcentre 3119 |
|
|
merlingerin a scris: | \
Florin ,
La Xerox WC 3119 se reseteaza chip-ul la fiecare reumplere, sau se inlocuieste.
Exprima-te in romaneste, e forum romanesc !!
![Very Happy](images/smiles/icon_biggrin.gif) |
Prietene, cand se aduna 20 intr-un loc si unul singur nu intelege romana dar stie engleza, ceilalti trec pe engleza. Plus ca topicul a fost deschis in engleza de cineva din afara Romaniei, asa ca fii mai pe faza prietene si lasa asa in engleza ok?
for theknow
merlingerin said:
Citat: | Regarding Xerox WC 3119, the chip is replaced or reseted on every refill. |
|
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
merlingerin
Data înscrierii: 30/Mar/2010 Mesaje: 111 Locație: Bucuresti
|
Trimis: Joi Ian 06, 2011 2:09 pm Titlul subiectului: |
|
|
Salut Iuliu.
Si eu te apreciez.Si sper ca " prietene " nu a fost folosit in zeflemea...
Topicul e deschis pentru WC 3220.
Florin se referea la WC 3119.
Ar fi bine sa tai topicul si sa muti ce e in plus la WC 3119...
ca tot ziceai de faza si nul
Sanatate si La Multi Ani !
Liviu. _________________ 0747.454.998 |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
mediatecar Site Admin
Data înscrierii: 16/Noi/2007 Mesaje: 2406
|
Trimis: Joi Ian 06, 2011 3:24 pm Titlul subiectului: |
|
|
Acu' las asa. Si "prietene" e cu drag, desigur! |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
Florin_Rosu
Data înscrierii: 05/Mar/2009 Mesaje: 26
|
Trimis: Joi Ian 06, 2011 4:56 pm Titlul subiectului: |
|
|
Initial am cautat un topic pentru 3119, dar nu am gasit si am postat aici. Imi cer scuze daca trebuia sa deschid un topic nou Salutare tuturor! |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
theknow
Data înscrierii: 20/Dec/2010 Mesaje: 16 Locație: United State
|
Trimis: Joi Ian 06, 2011 11:54 pm Titlul subiectului: |
|
|
Hi Thank you so much, to all, I have made the firmware update, and It work well, it is fabulous,
Thanks, |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
mediatecar Site Admin
Data înscrierii: 16/Noi/2007 Mesaje: 2406
|
Trimis: Vin Ian 07, 2011 8:36 am Titlul subiectului: |
|
|
That's great news!
Well, we can just hope you tell all your friends about our print©-family here in Romania, and how glad we are to help anyone having that kind of questions!
![Cool](images/smiles/icon_cool.gif) |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
theknow
Data înscrierii: 20/Dec/2010 Mesaje: 16 Locație: United State
|
Trimis: Vin Ian 07, 2011 7:10 pm Titlul subiectului: |
|
|
Yes of course, Im gonna tell them about this community, , thanks to all of you |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
newbie
Data înscrierii: 07/Iul/2010 Mesaje: 5
|
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
mediatecar Site Admin
Data înscrierii: 16/Noi/2007 Mesaje: 2406
|
Trimis: Vin Ian 14, 2011 4:57 pm Titlul subiectului: |
|
|
Aia nu e mandrie, e eventual prostie. dar nici aia nu e, pur si simplu diferenta e ca rusii nu stiu romana pe cand noi stim engleza, in acest caz e simplu: noi vrem sa-l ajutam pe om si nu ne impiedicam de amanuntul limbii folosite in comunicare, cine e atat de mandru national ca asta il impiedica sa dea o mana de ajutor e sigur in comunitatea gresita aici la acest forum, unde cuvantul de ordine e sa ne sprijinim.
![Wink](images/smiles/icon_wink.gif) |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
mediatecar Site Admin
Data înscrierii: 16/Noi/2007 Mesaje: 2406
|
Trimis: Mar Ian 25, 2011 8:26 am Titlul subiectului: |
|
|
You dont use whatever toner, of course! But in every country toners for refill have product codes according to suppliers there. Here you have an example:
http://masseymichaels.resedagbok.org/2011/01/13/xerox-workcentre-3210-3220-extra-dark-print-toner-cartridge-refill-4-1k-45/
So the best thing you can make is to search refill suppliers in your area and look for toner Xerox dedicated.
Dont put whatever toner in your cartridge, that's sure!
Quantity is different for the 2100 pages or 4000 pages cartridge, but if you buy toner for refill you receive instructions, or the bottle is usually made exactly for one refill.
Where are you from, mate? What country?
Ultima modificare efectuată de către mediatecar la Vin Ian 28, 2011 9:10 am, modificat de 1 dată în total |
|
Sus |
|
![](templates/subSilver/images/spacer.gif) |
|